15 Things You Didn't Know About Repairing Upvc Windows
Repairing UPVC Windows
uPVC Windows are a great option for your home. They help to keep heat in the house in winter and cool air outside during the summer. However, they can be damaged by a variety of factors and need repairs.
It’s good to know that repairing windows made of upvc isn’t as difficult as you may think. The most frequent problems are broken handles and squeaky hinges.
Squeaky Hinges
uPVC is a fantastic choice for modern homes since it is durable, strong and requires little maintenance. These windows also have many advantages for homeowners, such as thermal insulation and sound insulation. If you are considering installing windows with these features, you need to be aware of some possible problems.
One of the most common problems that uPVC windows may face is squeaky hinges. This issue occurs when the window repairs northampton sash window repairs moves against the frame when it’s open and closed. This is usually caused by the accumulation of dirt, rust and residue that make it difficult for the window wheels to move smoothly. This issue is usually solved by spraying WD-40 High Performance Silicone Lubricant on the hinges.
This lubricant assists the sash to move easily against the frame and stops the whistling sound that can occur. However, if the issue is due to something more serious, it may be best to call a professional double glazing window repairs installation service who can offer you the replacement for your defective window.
Draughts are another problem that can occur when using uPVC windows. This is due to the fact that there are often gaps that are hollow between the window aperture and the frame, which can allow air to enter these gaps during windy days. This can result in the loss of heat and a rise in your energy bills. This is why it’s crucial to check that your uPVC windows will form an enveloping seal when shut.
It is also important to clean your uPVC window. You should clean them every four to eight times per year with a soft white cloth that has been soaked in warm water and liquid soap. Avoid cleaning them in direct sunlight to prevent a streaky finish on the glass. If you are using a cleaner, ensure that it doesn’t contain dyes as they can stain uPVC.
Oridow will assist you in finding the most suitable solution for your home, whether you wish to install new uPVC or replace windows you have. Our skilled technicians will advise you on the best type of uPVC for your home, and repairing Windows will be able to answer any questions you might have about the process.
Broken Handles
As time passes and with regular use, window handles may be damaged or even break. This can be a hassle particularly if it becomes difficult to open the windows with the handle. It is essential to address the issue as soon as you can when your window handles don’t work as they should. This will ensure that your windows are secure and allow you to open them easily.
It could be as simple as replacing the portion of the window handle that’s broken. It’s possible to do this for relatively little cost It’s worth a look in the event that your handle is no longer working in the way it should. It’s important to make sure that the handle you choose is compatible with both the window type and locking mechanism. It shouldn’t be too difficult to do.
One common reason for a window handle to not to function is that the square drive spindle inside has moved out of place. This can be quite easy to fix, but the trick is to make sure that you’re using the right tool for the job. Make sure that you don’t use a power tool, because this could damage the handle or the window frame. Instead, you should use a hand screwdriver that will be easier to grasp and less likely to cause damage.
Another issue that is common is that the shoot-bolt (espag gear) is not connected with the handle gearbox. If you’re experiencing this, it’s a good idea contact a professional window repair expert to ensure that the issue can be addressed before any further water intrusion occurs.
You can fix this problem by changing the position of the shoot bolt. To do so you need to insert a right-angled wrench into the gap between your window frame and glass. The tool should be pushed inwards past the point where the roller cam is likely to be and then gently pull it towards the handle to see if you are able to connect the roller cam. If this doesn’t work, the shoot bolt is likely detached from the gearbox for the handle and needs to be replaced. You can purchase the replacement shoot bolt at the majority of hardware stores.
Frames that are damaged
UPVC is a well-known material for window frames because it’s strong, energy efficient and low maintenance. However in time, UPVC may develop damages that need to be repaired. Some of the most common repairs are a damaged frame or sill leaky seals, broken or cracked handles. Repairs are usually straightforward however the cost can vary depending on the size of the window and the type of repair required.
uPVC frames can be affected by wear and tear, as well as weather. This could result in the surface of the UPVC being scratched or discolored. This could be caused by applying a cleaner that is too harsh on the windows or accidentally dropping a heavy object against the frame. This should be addressed promptly to prevent the scratch marks from damaging your home.
Wood is also a material used for window frames, however it can suffer from similar issues to UPVC. The best way to prevent this is to regularly apply wood protection to the surface of your window sills and frames. It is also recommended to arrange for repair services as soon as you notice the rotting of the wood, which can result in water leaks and air drafts coming through the window lock repair. You can tell if the wood is decaying by putting a screwdriver on the surface and then observing if it is able to go into.
It is possible to repair some frames and sashes that are made from wood, but it can be difficult when the rot has progressed considerably. This could mean that the sash or frame, will need to be completely replaced.
Unlike UPVC frames, a wooden one is more likely to split or crack as time passes due to shrinkage and swelling with heat and moisture. This can result in gaps and holes that have to be filled with filler. To guard the wood from moisture and prolong its lifespan it is essential to have it professionally stained or treated.
Difficulty opening the window
Upvc windows are an excellent choice for your home because they last longer and require less maintenance and offer excellent insulation. However, this doesn’t mean that they aren’t susceptible to issues. Fortunately, many issues can be solved without calling in professionals.
If your window is hard to open, it could have a handle that is become stuck or jammed. If this is the case, try to loosen the handle by hand. If this doesn’t work, you can try using a prybar. Put a piece of wood in the frame’s direction to give the pry bar leverage. Then slowly push it upwards, allowing shoot bolts and roller cams to return into the open position. Repeat this process until you’re able to fully open the window.
Another common reason that windows are difficult to open is that it has become stuck against the frame. This can happen if the frame has been damaged or was painted unevenly. If this is the case, you’ll need to remove the window sash and the rope connecting it. You’ll then need to clean the frame and the sash and use an utility knife or a hand sander to smooth any rough areas.
Deterioration of the gasket’s rubber can cause issues. If the seal is worn, it allows cold air to enter the house and warm air to escape, which can lead to higher heating costs. It is necessary to replace your old seal to prevent this. This is a simple task that you can complete yourself.
Maintaining your uPVC window in a proper manner is the key to avoiding common problems. It is crucial to regularly clean the frames with a nonsmear glass cleaning solution. This will prevent dirt and grime from accumulating, which can cause the handles to become stiff and the hinges to vibrate. Lubricating the moving parts of the window is also recommended. This can be accomplished using a solvent PVC cleaner like WD-40. Also, you must regularly ensure that vents and drain holes are not blocked.