Five Saab 9-3 Key Replacement Lessons From Professionals
How to Replace the Replacement Key Battery For the saab replacement key 9-3
saab key programming owners have to follow a series of steps that are unique to add a second ignition key. This requires the use of a handheld computer called Tech-2 that is operated by the dealer. Then a new car key and transponder must be purchased and then programmed to the car.
Make sure to rotate your keys in order to prevent one from wearing out quicker than another. This will keep your keys in good condition.
Replacement Case
As opposed to the traditional Saab keys of old keys, the modern key fobs are equipped with electronics that make it difficult to make a copy. This has made stealing cars much more difficult than it was a few years ago. But, it has also made replacing lost keys a more costly endeavor.
Every owner of a Saab 9-3 must have at least two functioning keys. If one of them is lost, it costs a lot of money to replace it in the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers typically charge between $100 and $200 to do this.
There are several ways to get around these costly. Some parts providers will use the code of an old key to cut a new metal blade for a fraction of that of a dealer. The key, however, must be the same as the original to work correctly in your vehicle.
You can also replace the case yourself by following these steps. You’ll require a flathead screwdriver and some patience. With the screwdriver slowly pull the plastic apart and then separate the emergency key from the case. Once you have the case open, remove the electronic components and place them inside the new case. Put the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive part that can be easily and quickly replaced. The YouTube video of Cyclone Cyd shows how to replace the battery for the remote fob in only four steps. This tutorial can be used with any modern Saab key fob. However, the process might differ slightly.
The first step is to locate the button that will release the backup key in the fob. This button is typically located on the back of your fob, right next to the Saab Logo. Then take a flathead screwdriver to insert into the small hole in this button. This should be enough to open the case in order to change the battery.
Once you have installed the CR1632 batteries, you can rebuild the remote key fob. Then, you can program it into your car. The procedure should take no more than a half hour at the most. It is a very simple procedure that doesn’t require any special equipment.
If you lose a key the process will be a bit more involved, but it can still be done. The dealer will first need to read the VIN of the vehicle and then order the replacement TWICE module as well as key blade with the proper unique code. The dealer will then have to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is the part that locks and unlocks your car. It is equipped with a battery within. The batteries last for a period of, and they will eventually expire. This is a common problem that occurs with all vehicles, and the good news is that you can change the batteries in a majority of key fobs without having to replace the whole case. You can purchase fobs replacements on Amazon that include all the electronics already installed, so you can simply open the case and replace the old batteries. It is necessary to remove the emergency key before you replace the batteries. To accomplish this, simply insert a small flathead screwsdriver into the slot that is in the middle of the. Use the screwdriver to move around the case, and it will split open, making it simple to remove.
If you’re ready to replace your keys, have an extra set on hand. This can save you a lot of money. If you do have a spare, you can have the dealer cut a new key and program it into your car, which is cheaper than replacing the entire key fob.
If you don’t have a spare, it is possible to add a second key to your car, however this requires a lot research and effort. The cost for adding a second key is about a few hundred dollars and it also requires programming of the car’s computer. This can be accomplished by a professional, Saab Car Key Replacement however it’s a costly option for the majority of owners.
Replacement Ignition
As opposed to earlier Saab automobiles, the new saab Car Key replacement key for saab 93 (http://Web018.dmonster.kr/) 9-3 models use an advanced alarm system that is built on a key code. If you lose your only key, it can be costly to purchase a new one because the car must have a special computer added and be programmed to accept a brand new key. Most locksmiths can’t do this, and even dealers will charge hundred dollars to program the new key!
Dealers will charge you a premium to replace your car’s computer (also called the CIM or SAAB twice) in the event that you lose your only working key. Instead we can reprogram the EEPROM on your existing car computer, preparing it for a new key, slashing over 50% of the price you be charged at a dealership.
If you have owned a car like the saab 93 key programming 9-3 for quite a while you’re aware that the ignition keys aren’t very durable. They can get extremely sticky, and the buttons can fall off at times and you should think about buying a new one if the one you have isn’t functioning properly. It’s good to know that replacing the ignition key isn’t as complicated as it seems, and it can be done fairly quickly with the appropriate tools.