How Much Do Saab 9-3 Key Replacement Experts Earn?
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of special steps to install a second ignition key. This requires a handheld computer, called Tech-2 that is operated by the dealer. Then the transponder is replaced and a key must be purchased.
It is recommended to rotate your keys in order that one does not get worn out more quickly than the other. This will also ensure that your keys remain in top shape.
Replacement Case
Unlike the classic saab replacement key keys of the past keys, the new key fobs have electronics inside which makes it hard to copy. This has made theft of cars much more difficult than it was twenty years ago. It also makes it more expensive to replace keys lost.
Every owner of a 9-3 Saab should have at a minimum two functioning keys. If one is lost, it costs a fortune to add another to the vehicle because it requires replacing the CIM module and re-programming the locking cylinders. Dealers will typically charge $100-$200 for this.
There are ways to avoid these high costs. Some parts suppliers will use the code of a spare key to cut a new metal blade at a fraction what the dealer charges. The key must, however, be the same as the original to work correctly within your car.
You can also replace the case yourself by following these steps. You will need to have a flathead and patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once you have the case opened, take out the electronics and place them inside your new case. Make sure you insert the correct key and badge inside the case.
Replacement Battery
The replacement battery for the saab 9-3 key replacement 9-3 is an inexpensive part that can be replaced quickly and easily. This video tutorial on DIY from YouTube user Cyclone Cyd explains how to replace the remote key fob battery in just four steps. This tutorial is suitable for any modern saab key fob, saab Replacement keys although the process might differ slightly.
This button is usually placed next to the saab key programming near me logo on the back of the fob. The button is usually found on the back of the fob, just below the Saab Logo. Use a flathead to insert the screwdriver in the small hole in this button. This should be sufficient to let the fob case open to allow you to change the battery.
After the new battery CR1632 is installed then you can reassemble your remote key fob and then program it to your car. The entire process shouldn’t exceed an hour. It’s a simple process that does not require any special equipment.
The procedure is a little more complex if you lose your key, but still possible. The dealer must first read the VIN of the vehicle, and then purchase a replacement TWICE module and key blade that is matched to the unique code. After that, they will need to cut the replacement key and then program it with an innovative software tool called MDI.
replacement saab key Key Fob
The key fob is the device that locks and unlocks your car, it has a battery within. Batteries have a finite lifespan and eventually die. This is a typical issue that occurs with all vehicles and the good thing is that you can replace the batteries in most key fobs without having to replace the whole case. You can buy fobs replacements on Amazon that have all the electronics already in place, so you’ll simply open the case and replace those batteries that are old. It is important to keep in mind that you’ll need to remove the emergency key first, and you can do this by inserting a small flathead screwdriver into the slot in the middle of the case. Use the screwdriver to move around the case until it will split open, making it easier to remove.
If you are about to replace the keys, ensure you have spare keys, since this will cut down the total cost by a substantial amount. If you have an extra key, request the dealer to cut it and program it for your car. This is much cheaper than purchasing a new key fob.
It is possible to add a second key to your car even if you don’t have one, but it will require a great deal of research and work. It costs a few hundred bucks to add a second car key. The computer in the vehicle must also be programmed. This can be done by a professional, however it is an expensive option for most owners.
Replacement Ignition
Contrary to earlier Saab cars, the modern SAAB 9-3 models feature an advanced alarm system that is built on a key code. This means that in the event that you lose your only working key, replacing it with another one can be very expensive since the car has to have a special computer module added and it must also be specifically designed to accept a different key. Most locksmiths can’t do this, and even dealers will charge hundred dollars to program the new key!
If you’ve lost your sole working key, a dealer will repair your car’s computer (known as the CIM or saab replacement keys (similar resource site) TWICE) to make a replacement, and will charge a premium for it. We can reprogram the EEPROM of your car’s computer to make it ready for an additional key. This will save you more than 50% off the price you’d spend at an auto dealer.
If you’ve been a long time owner of a 03-11 SAAB 9-3, you likely know that the ignition key isn’t very durable. If the ignition key you have isn’t working correctly, you should look into replacing it. They can become very sticky and the buttons can fall off. It’s not as difficult as it appears to replace the ignition key. With the right tools, it is able to be accomplished quickly.